Electronics Manufacturing

APPLICATIONS & SOLUTIONS

Electronics

With shrinking node size, modern integrated circuits are so complex that even the smallest contaminant can create costly defects. Ultrapure water (UPW) is vital to cleaning wafers in the fabrication plant, and to prevent failure, must be free of organic and inorganic compounds, particulates, and other contaminants. Meanwhile, water shortages pose a significant threat to expansion, and processes generate wastewaters with hazardous metals and solvents. Major electronics companies are responding by recycling water internally to high levels and recovering chemicals from waste to tighter standards.

Jacobi provides a product line tailored for high-purity UPW with low levels of contaminants. Our products undergo specialized treatment to remove organic residuals left after primary manufacturing and are fully regenerated to the H+ and OH- forms. We enable our customers to reliably supply UPW to the fab with >18.2 MΩ·cm resistivity, low TOC leakage (< 5 ppb), on-line particles (>0.05 µm), and silica (max. 0.5 µg). Our solutions also enable our customers to improve sustainability goals by reusing water, recovering chemicals, and improving waste discharge to the environment.

SUMMARY

  • Ultra Pure water preparation
  • Extremely low TOC release
  • Chemical recovery
  • Process water treatment
  • Economical advantage

Pre-Treatment

  • Jacobi’s softening SAC and WAC resins enable hardness removal prior to downstream steps.

Primarily Loop

Jacobi’s SAC and SBA resins enable demineralization prior to the RO units in the primary loop.

Polishing Loop

Jacobi’s Resinex™ RU MX-2 UB eXtra pure mixed bed resins for final polishing.

Reclaiming Loop

Separate copper from wastewater with Jacobi chelating resins (CH).

Separate tetra-methyl ammonium hydroxide (TMAH) from wastewater with Jacobi high performance weak acid cation (WAC) resins.

ELECTRONICS: PROCESSES

Ultra pure water preparation

Preparation of ultra pure water.

Boron removal

Heavy metal removal from Drinking water, ground water, sea water and Industrial water.

Demineralisation of ultra-pure water

Removal of all ions from a water stream (salts and minerals) to lower conductivity.

Mixed bed (Polishing)

Demineralization treatment with a mixed bed resins (SAC + SBA) to remove residual ions salts and minerals after a demineralization system.

Mixed bed (ready-to-use)

Removal of all ions from a water stream (salts and minerals) to lower conductivity.

ELECTRONICS: PRODUCTS

ch

Chelating Resins

Specialist resins for ion exchange processes where there is a high presence of competing ions.

sba_1

Strong Based Anion

Strong base anion resins are bead sized co-polymers (mainly polystyrene-divinylbenzene) with a tertiary or quaternary ammonium group which removes anions in various processes. Resinex SBA comes in gel or macroporous type and is available in different bead sizes.

sac

Strong Acidic Cation

Strong acidic cation resins are bead sized co-polymers (mainly polystyrene-divinylbenzene) with a sulfuric group which attracts cations. Resinex SAC comes in gel or macroporous types and are available in several bead sizes to adapt to different applications.

wac

W A C

WAC are polyacrylic, gel or macro ion exchange beads. They have the unique carboxylic acid functions.

wba

Weak Based Anion

Weak base anion resins are bead sized co-polymers (mainly polystyrene-divinylbenzene) with tertiary ammonium groups, which are usually macroporous in structure.

ir

Inert Resins

Non-functionalized inert media made from Polypropylene or Polyethylene.

mb

Mixed Bed Resins

Composed of strong cationic and anionic ion exchangers based on a polystyrene-divinylbenzene matrix.

GET IN TOUCH

Fill out the short form below and or team will be in touch.

  • This field is for validation purposes and should be left unchanged.